An independent Level 2 damp survey was carried out on a ground floor flat in Wandsworth (SW18). The property owner requested the survey to investigate hallway wall dampness and bathroom ceiling mould. The comprehensive check delivered an impartial, expert appraisal of the property’s overall condition.
About the Issue
Concerns arose after the homeowner identified localised wall dampness in the hallway and mould patches on the bathroom ceiling. They feared that rising dampness was spreading through ground-contact walls or that concealed pipework was leaking.
The Challenge
The inspection involved testing internal walls, floor surfaces, plumbing runs, drainage outlets and sanitary seals using calibrated diagnostic tools.
Key testing results and observations included:
- Calibrated moisture meters confirmed dampness was isolated strictly to one hallway wall adjoining the bathroom.
- Physical inspection revealed failed silicone sealant and white water marks around the bath, proving shower water was escaping into the hallway wall.
- Bathroom ceiling mould was diagnosed as condensation caused by insufficient ventilation during bathing.
- Checks on visible plumbing, drainage, structural masonry and accessible timbers confirmed zero pipe leaks, no drain blockages, sound structural integrity and zero dry rot, wet rot, or woodworm.
Exterior checks confirmed no building fabric defects or penetrating damp. The surveyor concluded that surface bath sealant failure was the sole cause of the hallway wall moisture.
The Solution
The report detailed a practical action plan to stop water escape and restore the interior:
- Remove degraded silicone around the bath/shower surround and replace it with high-grade sanitary silicone.
- Provide sufficient drying time for the hallway wall to dry naturally without invasive building works.
- Clean the bathroom ceiling mould using an appropriate mould treatment.
- Maintain effective bathroom ventilation by running the extractor fan during and after shower use.
The Outcome
The homeowner received definitive proof that their property was structurally healthy and free from rising damp or pipe leaks. Choosing an independent specialist survey saved them from unnecessary, expensive wall tanking, directing their budget strictly to basic sealant replacement and mould cleaning.
Why This Case Matters
When water leaks past bath silicone, continuous moisture absorption can create internal wall dampness that mimics rising damp. Independent diagnostic surveys verify sanitary seal performance, ensuring root causes are rectified without unnecessary plaster removal.

