Laboratory Mould & qPCR DNA Analysis
Surface swab or lift samples are submitted to an accredited laboratory for advanced qPCR DNA testing to identify exact mould species and spore concentrations.
Why it matters: Identifies toxigenic species (e.g., Stachybotrys chartarum) and concealed mould growth behind dry lining or furniture.
Diagnostic value: Establishes whether mould contamination is localised or widespread, enabling precise environmental remediation planning.
This service may be beneficial where:
- A persistent musty smell is present
- Mould repeatedly returns after cleaning
- The property has experienced previous water damage
- Contamination is suspected behind furniture or inside cupboards
- Occupants have concerns about the indoor environment
- The extent of visible mould is unclear
- Independent laboratory evidence is required
Note: The results can help establish whether contamination appears isolated or more widespread. They may also assist with planning appropriate cleaning, removal, drying, ventilation or moisture-control measures. Laboratory mould testing does not replace the need to investigate the moisture source. Mould is normally a symptom of excess moisture, condensation, leakage or inadequate ventilation, so the underlying cause must also be identified. If we carry out the recommended work, the survey fee will be deducted from the cost of that work.
Equipment & Inspection Levels
Select Your Survey
Essential Damp Survey
Standard price: £299 + VAT
Promotional Price: £199 + VAT (Limited Time Offer)
Repair Deduction: Full survey cost deducted if remedial work is instructed.
The Level 1 survey is an entry-level inspection of the main accessible areas. It is intended for relatively straightforward concerns involving visible damp, suspected rising damp or isolated moisture patches.
Equipment Provided
- Electronic damp meter
Areas and Checks Included
- Accessible walls
- Accessible floors
- Ceilings
- Visible drain and plumbing leak checks
- Damp information and prevention guidance
Recommended For
This option is suitable when a customer needs a basic assessment using a standard damp meter. It can be used for a general check or where there is a simple and clearly defined moisture concern.
The inspection covers accessible internal surfaces, drains and plumbing but does not include the advanced diagnostic instruments provided with the higher survey levels.
The survey price will be deducted if we undertake the recommended remedial work.
Enhanced Damp & Timber Survey
Standard price: £399 + VAT
Promotional Price: £299 + VAT (Limited Time Offer)
Repair Deduction: Full survey cost deducted if remedial work is instructed.
The Level 2 survey includes the Level 1 inspection together with deeper moisture investigation and checks for timber-related deterioration.
Equipment Provided
- Electronic damp meter
- Deep-reading moisture meter
- Non-invasive moisture scanner
Areas and Checks Included
- Accessible walls, floors and ceilings
- Visible drain and plumbing leak checks
- Wet rot inspection
- Dry rot inspection
- Woodworm inspection
- Deeper moisture readings from suitable building materials
- Non-destructive moisture checks beneath accessible floors and within subfloor areas
- Damp information and prevention guidance
Recommended For
It is appropriate for concerns involving wet rot, dry rot, woodworm, concealed dampness or moisture below finished surfaces.
The combination of deep-reading and non-invasive instruments allows the surveyor to gather information from subfloors, beneath accessible floorboards, behind suitable panelling and within other reachable concealed areas without unnecessary dismantling.
The Level 2 survey is a good choice for buyers and sellers who require a more detailed damp and timber assessment before proceeding with a property transaction.
The survey charge will be deducted from the cost of remedial work undertaken by us.
Comprehensive Property Moisture Survey
Standard price: £499 + VAT
Promotional Price: £399 + VAT (Limited Time Offer)
Repair Deduction: Full survey cost deducted if remedial work is instructed.
The Level 3 survey is our most comprehensive inspection. It incorporates the Level 1 and Level 2 services and adds advanced diagnostic equipment, ventilation testing and high-level external inspection.
Equipment Provided
- Electronic damp meter
- Deep-reading moisture meter
- Non-invasive moisture scanner
- Infrared thermal imaging camera
- Indoor humidity monitor
- HD borescope camera
- Airflow and ventilation tester
- 4K inspection drone
- Socket and RCD testing device
Areas and Checks Included
- Accessible walls, floors and ceilings
- Visible drains and plumbing
- Wet rot, dry rot and woodworm
- Deep moisture testing
- Accessible subfloor moisture checks
- Thermal imaging
- Indoor humidity measurement
- Borescope examination where appropriate
- Brickwork and pointing
- Visible damp-proof course
- Extractor fan airflow
- Roof coverings
- Chimney stacks
- Flashing and guttering
- High-level external components
- General visible structural condition
- Basic socket and RCD screening
- 4K drone photographs where flight conditions permit
Recommended For
This option is suitable when a customer needs a basic assessment using a standard damp meter. It can be used for a general check or where there is a simple and clearly defined moisture concern.
The inspection covers accessible internal surfaces, drains and plumbing but does not include the advanced diagnostic instruments provided with the higher survey levels.
The survey price will be deducted if we undertake the recommended remedial work.
Contact Us
If you have some questions, please complete this form:
Book and Pay for a survey
If you are ready to book a survey and pay, please complete this form:
Contact Us
If you have some questions, please complete this form:
Book and Pay for a survey
If you are ready to book a survey and pay, please complete this form:
Contact Us
If you have some questions, please complete this form:
Book and Pay for a survey
If you are ready to book a survey and pay, please complete this form: