Laboratory Analysis of Plaster Samples
(The cost of this add-on is deducted from your repair bill if we carry out the recommended remedial works).
Small plaster samples are carefully taken from affected walls and sent to an independent laboratory to analyse the concentration of hygroscopic salts (chlorides and nitrates).
Why it matters: Hygroscopic salts are carried by ground moisture during rising damp and remain in plaster even after masonry dries.
Diagnostic value: Differentiates true rising damp from condensation, rainwater penetration, or temporary plumbing leaks.
Price £299 + VAT
Check Availability And Book Now
Note: Salt analysis can be particularly helpful when moisture-meter readings alone do not provide a sufficiently clear diagnosis. It may assist in distinguishing possible rising damp from condensation, water penetration or residual contamination caused by a historic leak. The results are considered together with the moisture profile, construction of the building, external ground levels, condition of the damp-proof course and other survey observations. This is the only additional service requiring minor invasive work because physical plaster samples must be collected. If we undertake the recommended remedial work, the survey cost will be deducted from the cost of that work.
Price £299 + VAT
Click Here To Check Availability And Book Now ❯Equipment & Inspection Levels
Select Your Survey
Essential Damp Survey
Standard price: £299 + VAT
Promotional Price: £199 + VAT (Limited Time Offer)
Repair Deduction: Full survey cost deducted if remedial work is instructed.
The Level 1 survey is an entry-level inspection of the main accessible areas. It is intended for relatively straightforward concerns involving visible damp, suspected rising damp or isolated moisture patches.
Equipment Provided
- Electronic damp meter
Areas and Checks Included
- Accessible walls
- Accessible floors
- Ceilings
- Visible drain and plumbing leak checks
- Damp information and prevention guidance
Recommended For
This option is suitable when a customer needs a basic assessment using a standard damp meter. It can be used for a general check or where there is a simple and clearly defined moisture concern.
The inspection covers accessible internal surfaces, drains and plumbing but does not include the advanced diagnostic instruments provided with the higher survey levels.
The survey price will be deducted if we undertake the recommended remedial work.
Enhanced Damp & Timber Survey
Standard price: £399 + VAT
Promotional Price: £299 + VAT (Limited Time Offer)
Repair Deduction: Full survey cost deducted if remedial work is instructed.
The Level 2 survey includes the Level 1 inspection together with deeper moisture investigation and checks for timber-related deterioration.
Equipment Provided
- Electronic damp meter
- Deep-reading moisture meter
- Non-invasive moisture scanner
Areas and Checks Included
- Accessible walls, floors and ceilings
- Visible drain and plumbing leak checks
- Wet rot inspection
- Dry rot inspection
- Woodworm inspection
- Deeper moisture readings from suitable building materials
- Non-destructive moisture checks beneath accessible floors and within subfloor areas
- Damp information and prevention guidance
Recommended For
It is appropriate for concerns involving wet rot, dry rot, woodworm, concealed dampness or moisture below finished surfaces.
The combination of deep-reading and non-invasive instruments allows the surveyor to gather information from subfloors, beneath accessible floorboards, behind suitable panelling and within other reachable concealed areas without unnecessary dismantling.
The Level 2 survey is a good choice for buyers and sellers who require a more detailed damp and timber assessment before proceeding with a property transaction.
The survey charge will be deducted from the cost of remedial work undertaken by us.
Comprehensive Property Moisture Survey
Standard price: £499 + VAT
Promotional Price: £399 + VAT (Limited Time Offer)
Repair Deduction: Full survey cost deducted if remedial work is instructed.
The Level 3 survey is our most comprehensive inspection. It incorporates the Level 1 and Level 2 services and adds advanced diagnostic equipment, ventilation testing and high-level external inspection.
Equipment Provided
- Electronic damp meter
- Deep-reading moisture meter
- Non-invasive moisture scanner
- Infrared thermal imaging camera
- Indoor humidity monitor
- HD borescope camera
- Airflow and ventilation tester
- 4K inspection drone
- Socket and RCD testing device
Areas and Checks Included
- Accessible walls, floors and ceilings
- Visible drains and plumbing
- Wet rot, dry rot and woodworm
- Deep moisture testing
- Accessible subfloor moisture checks
- Thermal imaging
- Indoor humidity measurement
- Borescope examination where appropriate
- Brickwork and pointing
- Visible damp-proof course
- Extractor fan airflow
- Roof coverings
- Chimney stacks
- Flashing and guttering
- High-level external components
- General visible structural condition
- Basic socket and RCD screening
- 4K drone photographs where flight conditions permit
Recommended For
This option is suitable when a customer needs a basic assessment using a standard damp meter. It can be used for a general check or where there is a simple and clearly defined moisture concern.
The inspection covers accessible internal surfaces, drains and plumbing but does not include the advanced diagnostic instruments provided with the higher survey levels.
The survey price will be deducted if we undertake the recommended remedial work.
Contact Us
If you have some questions, please complete this form:
Book and Pay for a survey
If you are ready to book a survey and pay, please complete this form:
Contact Us
If you have some questions, please complete this form:
Book and Pay for a survey
If you are ready to book a survey and pay, please complete this form:
Contact Us
If you have some questions, please complete this form:
Book and Pay for a survey
If you are ready to book a survey and pay, please complete this form: